Sunbeam Service Sheets |
|
|
|
Thanks to David
Holyoake of Stewart
Engineering we have the original Sunbeam service sheets and Stewarts own
additional documentation presented like
FAQ pages, some of which will save you hours of work and money and prevent
damage to other parts. They also build into an impressive historic technical
archive for your Sunbeam motorcycle.
These Service Sheets are now supplied free of charge, please ask for the pages you require. Some are quite large and may take a while to download on a modem connection. This information was written between 1946 and current day and contains good technical drawings. |
Service Sheet Details |
|
Service Sheet 1 | Fitting the rear engine mounting damper plate S7 - 1948 |
Service Sheet 2 | Adjustment of engine dampers S7 & S8 - 1951 |
Service Sheet 3 | The rear suspension rebound spring assembly S7 - 1948 |
Service Sheet 4 | Conversion of gear ratios (solo\sidecar) S7 and S8 - 1950 |
Service Sheet 5 | Replacement of camshaft rockers and valve springs S7 - 1948 |
Service Sheet 6 | Motorcycle service tools - 1952 |
Service Sheet 6a | Sunbeam cycle service tools - 1956 |
Service Sheet 6x | Frame repairs - 1940 |
Service Sheet 7 | Distributor repairs - 1956 |
Service Sheet 8 | Timing chain tensioner S7 - 1949 |
Service Sheet 9 | Sidecar connections S7 and S8 - Date Unknown |
Service Sheet 10 | Oil pressure switch S7 and S8 - Date Unknown |
Service Sheet 11 | Timing chain tensioner fitted to engines with S8 prefix - 1951 |
Service Sheet 12 | Timing chain tensioner fitted to engines with S7 prefix - 1952 |
Service Sheet 13 | New part numbers - 1956 |
Service Sheet 14 | Crankshaft front main bearing S7 and S8 - 1954 |
Service Sheet 15 | Kickstarter quadrant and return spring replacement - 1954 |
Service Sheet 16 | Valve guide fitting - 1956 |
Service Sheet 17 | Fitting 50 watt dynamo to 1947/8 S7 - 1956 |
Service Sheet 18 | Crankshaft regrinding - 1956 |
Service Sheet 19 | Engine rubber mounting - 1952 |
Lucas MC45L | Lucas MC45L Service Manual |
Data Sheet 2a | Wiring Harness - 1992 |
Data Sheet 2b | Wiring Harness - 1992 |
Data Sheet 3 | Adjustment of engine damper and snubber assemblies - 1955 |
Data Sheet 4 | Fault Finding: No spark at plugs -1992 |
Data Sheet 5 | Fault Finding: Ammeter showing NO CHARGE - 1992 |
Data Sheet 6 | Fault Finding: Clutch - 1992 |
Data Sheet 7 | Fault Finding: Loss of power, poor performance, overheating ect - 1992 |
Data Sheet 8 | Fault Finding: Valve Timing - 1992 |
Data Sheet 9 | Frame Dimensions: (S7 - 1948) - 1992 |
Data Sheet 10 | Frame Dimensions: (S7 De luxe - 1949) - 1992 |
Data Sheet 11 | Frame Dimensions: (S8 -1949) - 1992 |
Data Sheet 12 | Paintwork S7 & S8 - 1992 |
Data Sheet 13 | Voltage Control (Servicing and setting up) - 1992 |
Data Sheet 14 | Fitting cylinder heads - Date Unknown |
Data Sheet 15 | Lubrication criteria for classic, vintage and veteran engines |
Data Sheet 15b | Oils |
Data Sheet 16 | Fitting a distributor dog - 1966 |
Data Sheet 17 | Common Sunbeam bolt sizes S7 & S8 |
Data Sheet 18 | Amal Concentric carburettors Series 600 and 900 |
Data Sheet 19 | Engine rubber mountings - 1952 |
For Sunbeam S7 & S8 spares, repairs or anything to do with 'Beams'! Contact: Stewart Engineering Church Terrace Harbury, near Leamington Spa Warwickshire CV33 9HL England. Tel/Fax: +44 (0)1926 612589 Email: sunbeams@stewartengineering.co.uk |
E-mail: sunbeams@classicglory.co.uk |
www.classicglory.co.uk |